Metal roofing that outlasts the house.
Standing-seam and metal roofing installed across the Valley — the longest-lasting, most energy-efficient roof you can put on a desert home, done right by a family crew.
- A+ BBB Accredited
- GAF Certified
- ROC 354850
- Licensed · Bonded · Insured
- A+ BBB Accredited
- GAF Certified
- ROC 354850
- Licensed · Bonded · Insured
Why Homeowners Call Us
The last roof you’ll ever buy.
A properly installed metal roof can last 50 years or more and reflects the desert sun instead of soaking it up — lower attic temps, lower cooling bills, and no shingles to replace every couple of decades.
But metal is unforgiving of a bad install — the panels, fasteners, and flashing all have to be right or it leaks and oil-cans. We install to spec so it performs for its full life. Three generations on Valley roofs means we know how to do it.
What’s Included
A metal roof done to last.
Full tear-off
The old roof stripped to the deck and hauled off, so your metal system goes on a clean, sound surface.
Deck inspection & repair
With the old roof off, we check and repair the decking so there’s a solid base under your metal panels.
High-temp underlayment
High-temp underlayment beneath the panels — the secondary water barrier that protects the deck for decades.
New flashing & valleys
Precise flashing and closures at walls, valleys, and penetrations — where a metal roof leaks if it’s rushed.
Standing-seam or panel
Standing-seam or exposed-fastener metal in a range of colors and finishes — matched to your home and budget.
Manufacturer warranty
Installed to spec so your panels and finish qualify for the full manufacturer warranty — registered in your name.
METAL IN THE DESERT
Built to move with 160° days.
A metal roof in Phoenix expands and contracts every single day. Standing-seam panels on concealed clips let the metal move without working fasteners loose. Exposed-fastener panels can’t, and every screw becomes a future leak. That’s why we only install standing seam on homes.
WHAT IT COSTS
The most expensive roof. The last one you’ll buy.
Standing-seam metal runs about $1,700 per square, or $34,000 to $51,000 on a typical Valley home. It lasts 40 to 60 years or more, and with a cool-roof finish it reflects more heat than any other pitched roof. Planning solar? Panels clamp to the seams with no holes in the roof.
→Full cost breakdown by materialPer square for standing-seam metal
Years a standing-seam roof can last
Exposed fasteners on our standing-seam systems
How It Works
Four steps. One solid metal roof.
In-home estimate
We come out, measure, look at what you’ve got, and give you a clear written quote — no pressure, no mystery line items.
Strip to the deck
We remove the old roof down to the decking and inspect everything underneath before we build back up.
Build it back
New underlayment, flashing, and your chosen material installed to manufacturer spec — the way it’s meant to go on.
Clean up & warranty
We haul off every scrap, magnet-sweep the yard for nails, register your warranty, and hand you the paperwork.
Common Questions
What homeowners ask first.
Is a metal roof too hot in Arizona?+
Is a metal roof loud in monsoon rain?+
How much does a metal roof cost in Phoenix?+
Can I put solar on a metal roof?+
Will my HOA allow metal?+
Booking metal roofs now
Get your metal roof quote.
Tell us about your home and what you’re after — we’ll come measure, talk through materials, and put a clear number in front of you.
Friday 8:00am – 3:30pm
Sat – Sun Closed