A new roof, built to outlast the sun.
Full tear-off and replacement — tile, shingle, metal, and foam — installed to spec by a family crew that’s roofed the Valley for three generations.
- A+ BBB Accredited
- GAF Certified
- ROC 354850
- Licensed · Bonded · Insured
- A+ BBB Accredited
- GAF Certified
- ROC 354850
- Licensed · Bonded · Insured
Why Homeowners Call Us
A roof is a system — we replace all of it.
A new roof is more than the tile or shingle you see. It’s the underlayment, the flashing, the valleys, and the ventilation underneath — the parts that actually keep water out. Replace only the top layer and you’ve bought a leak on a delay.
We tear off to the deck, inspect and repair what’s under there, and rebuild the whole assembly to manufacturer spec. Three generations in the Valley means we build for our sun and our monsoons — not a catalog.
What’s Included
A complete re-roof, not a patch job.
Full tear-off
We strip the old roof down to the deck and haul it away — no laying new material over worn-out roofing to trap heat and problems.
Deck inspection & repair
With the old roof off, we check the decking for rot and damage and repair it before anything new goes back down.
New underlayment
Fresh, high-temp underlayment — the real waterproof layer — rated for Arizona heat, not builder-grade felt.
New flashing & valleys
All flashing at walls, chimneys, and valleys replaced — the leak points a surface-only re-roof leaves behind.
Your choice of material
Tile, architectural shingle, standing-seam metal, or flat and foam — matched to your home, your look, and your budget.
Manufacturer warranty
Installed to spec so your roof qualifies for the full manufacturer warranty — registered and documented in your name.
WHAT IT COSTS
Real numbers, not “call for pricing.”
Typical Valley re-roofs on a 2,000 to 3,000 sq ft roof: architectural shingle about $550 per square ($11,000–$16,500). Tile lift-and-relay about $525 per square ($10,500–$16,000). Spray foam about $650 per square ($13,000–$19,500). TPO about $1,000 per square ($20,000–$30,000). Standing-seam metal about $1,700 per square ($34,000–$51,000). Your quote depends on size, pitch, tear-off, and decking.
→Full cost breakdown by materialREAD THE BID
Two bids, $6,000 apart. Here’s why.
The difference is almost always hidden under the roof: a thinner underlayment, reused flashing, or an open-ended “decking extra” line. Our written quote names the underlayment by brand, lists every flashing we replace, and prices decking per sheet. Compare it line for line with anyone.
Per square, depending on the material
Every quote itemized, line by line
Every re-roof stripped and inspected
How It Works
Four steps. One solid roof.
In-home estimate
We come out, measure, look at what you’ve got, and give you a clear written quote — no pressure, no mystery line items.
Strip to the deck
We remove the old roof down to the decking and inspect everything underneath before we build back up.
Build it back
New underlayment, flashing, and your chosen material installed to manufacturer spec — the way it’s meant to go on.
Clean up & warranty
We haul off every scrap, magnet-sweep the yard for nails, register your warranty, and hand you the paperwork.
Common Questions
What homeowners ask first.
How do I know if I need a replacement instead of a repair?+
How long does a roof replacement take?+
What roofing materials can you install?+
Do I need a permit to replace my roof?+
What kind of warranty do I get?+
Booking re-roofs now
Get your new roof quote.
Tell us about your home and what you’re after — we’ll come measure, talk through materials, and put a clear number in front of you.
Friday 8:00am – 3:30pm
Sat – Sun Closed